Frequently Asked Questions
Openflash Tablet v1 and v2 technical specifications 32-bit CPU ROM: 512Kb RAM: 32Mb On-Board Storage: 256Mb Display: TFT color 480x272px -- Touchscr...
Thu, 21 Jun, 2018 at 12:16 PM
A: No. Your OFT can only be installed on 1 vehicle at a time. In other words, once it has reprogrammed an ECU, it can only be used to program that same ECU ...
Thu, 21 Jun, 2018 at 11:47 AM
Open Flash Tablet - OFT TIPS Trick’s & FAQ Written by steve99 @ http://www.ft86club.com/forums/showthread.php?t=71157 Disclaimer All Information her...
Tue, 20 Mar, 2018 at 10:46 PM
We can't exactly tell how much power you're producing based on the information present in your datalogs. We're really just making sure that t...
Sat, 21 Apr, 2018 at 12:30 AM
The short answer is: No. Updating OFM only updates the program allowing it to run smoother and usually faster. This helps you update your OFT quicker, and ...
Thu, 5 Apr, 2018 at 7:48 PM
The OFT cannot perform software updates at this time. The reason for this is to prevent our valued customer from flashing incorrect programs onto their ECU; ...
Sat, 7 Apr, 2018 at 1:08 AM
To uninstall your OFT from your Vehicle (preparing it for a new vehicle installation) please perform the following steps: Connect your OFT to your vehicle...
Fri, 6 Dec, 2019 at 12:37 PM
IMPORTANT: If you follow these instructions, you will be making modifications to your fuel system. As such, there are major safety risks involved. If the ha...
Sat, 13 Jun, 2020 at 11:56 AM
IMPORTANT: If you follow these instructions, you will be making modifications to your fuel system. As such, there are major safety risks involved. If the ha...
Sat, 13 Jun, 2020 at 11:56 AM
For Mazda engine platforms we suggest you always start with Stage 1 OTS mapping. Then submit datalogs for review, free of charge. Free datalog revie...
Wed, 11 Jul, 2018 at 8:28 AM