How-To: Uninstall (un-marry) OFT From Your Vehicle.

Created by Anthony Cardinale, Modified on Fri, 6 Dec, 2019 at 12:37 PM by Anthony Cardinale

To uninstall your OFT from your Vehicle (preparing it for a new vehicle installation) please perform the following steps:

  1. Connect your OFT to your vehicle using the OBD to OFT connection cable.
  2. Turn the ignition to the ON position, without the engine running.
    1. To confirm the key is ON, you should see your fuel level gauge indicating a fuel level.
  3. With the OFT at the main menu, choose TUNING
  4. Next, select the tune file named ORIGINAL.
  5. Follow all on-screen prompts and messages that guide you through programming your ECU.
    1. Programming the ORIGINAL tune file back to your ECU put the ECU back to the ORIGINAL state it was in before you performed any tuning with the OFT.
  6. The OFT can now be erased (if desired/neccessary) using OpenFlash Manager.


If you're receiving a message in OpenFlash Manager that says to contact us for erase credits, please review the information and perform the steps outlined at the following link FIRST: Fix Common OpenFlash 

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article