After programming a tune file, you may notice that your SDGT with Cruse Control has a flashing CC light. Please follow this sequence to reset the light:


  1. Switch ignition ON: To do this, briefly press the RACE-ON button.
    • The cruise control lamp will flash.
  2. Press the cruise control tip switch on the left for 3 seconds.
  3. Press the cruise control tip switch to position RES/+ for 3 seconds.
  4. Press the cruise control tip switch to position SET/- for 3 seconds.
  5. Turn the throttle grip forward past the neutral position.
    • The cruise control lamp will turn off.
  6. Switch ignition OFF.