Stage Tune Hardware Requirements:
- Stage 1 is an slightly optimized OEM tune file
- Stage 2 is a tune file for any modified for any exhaust upgrades = header, slip on exh., etc.
- Stage 3 is a tune file for any modified exhaust system AND an upgraded intake such as Rotty, or Motohooligan (not a drop in panel filter).
We've raised the REV limit (fuel cut) slightly, but do NOT recommend you raise it more via .xdf and TunerPro. We don't adjust fan control temps, or disable fault codes because we've found no need to do those things at this time
During tablet installation, it will save your stock tune file and retain it in memory. You can flash back to stock anytime!