Disclaimer:  All downloadable .xml, .xdf, and tune files are created as the result of the extremely complex and time consuming process of reverse-engineering the factory ECU. Because of this complexity, it is necessary to make certain assumptions and, therefore, it is impossible to always deal in absolutes in regards to representations made by these files. In addition, due to this complexity and the numerous variations among different ECUs, it is also impossible to guarantee that the files will not contain errors or other bugs. What all this means is that there is the potential for bugs, errors and misrepresentations which can result in damage to your motor, your ECU as well the possibility of causing your vehicle to behave unexpectedly on the road, increasing the risk of death, loss, or injury. Modifications to your vehicle's ECU may also be in violation of local, state and federal laws. By using these definition files, either directly or indirectly, you agree to assume 100% of all risk and Openflash Performance Inc., its agents, creators and/or contributors shall not be held responsible for any damages or injuries you receive. This product is for advanced users only. There are no safeguards in place when tuning with TunerPro, ROMRaider, and on occasion your Openflash Tablet or Openflash Manager. As such, the potential for serious damage, injury, or loss still exists, even if you do not experience any bugs or errors.

These definition and tune files are created for free without any sort of guarantee. The developers and Openflash Performance Inc. cannot be held liable for any damage or injury incurred as a result of the files you willingly download. By seeking out and downloading these files you assume all risk, responsibility, and liability for the application and their use. 

v4.0x Off-The-Shelf Tune Hardware Information/Requirements

Stage 1 Hardware Requirements:

• OEM header. *Any exhaust modifications after the header is also compatible
• Stock Airbox (with or without aftermarket drop-in panel filter)
• Premium grade fuel

Stage 2 Hardware Requirements:

• Aftermarket CATTED header. *Any exhaust modifications after the header is also compatible
• Stock Airbox (with or without aftermarket drop-in panel filter)
• Premium grade fuel

Stage 2+ Hardware Requirements:

• Aftermarket CAT-LESS header. *Any exhaust modifications after the header is also compatible
• Stock Airbox (with or without aftermarket drop-in panel filter)
• Premium grade fuel

Stage 2+ (E85) Hardware Requirements:

• Stock OR Aftermarket CATTED OR CAT-LESS header. *Any exhaust modifications after the header is also compatible
• Stock Airbox (with or without aftermarket drop-in panel filter)
• E85 fuel ONLY!!

These FREE OFF-THE-SHELF tune files ONLY work with OEM intake systems, and any hardware mods listed above. We do not provide any tune files for other unique intake hardware you may have installed. If you’d like to use an aftermarket intake with these tunes, you may need to purchase a custom e-tune from us to adjust MAF scalings for proper fuel control.

These OTS maps have other updates including:

• Remapped throttle tables.
• Revised engine load limits.
• Fully supported data logging channels.
• A default advance multiplier of 0.70 instead of the typical 1.0.
  • The lowered default advance multiplier allows for quick learning ability based on your fuels knock resistance. Make sure you fill-up with a PREMIUM grade fuel!

Identifying you ECU's software Calibration Code

To check your ECU’s CALIBRATION CODE with your Openflash Tablet:

1. Connect your OFT to your vehicle 
2. Turn the key/ignition to the ON position.
   • For cars with conventional keys, that is TWO key clicks from OFF.
   • For cars with push-button start that is TWO button presses WITHOUT depressing the brake or clutch pedal.
   • Your fuel gauge should be indicating a fuel level when your in the ON position.
3. Select TUNING on your OFT
4. Select ECU INFO on your OFT

Locate your ECU’s calibration ID from this screen.

Installing your OFT onto your ECU (a.k.a Marrying)

1. Connect your OFT to your vehicle 
2. Turn the key/ignition to the ON position.
   • For cars with conventional keys, that is TWO key clicks from OFF.
   • For cars with push-button start that is TWO button presses WITHOUT depressing the brake or clutch pedal.
   • Your fuel gauge should be indicating a fuel level when your in the ON position.
3. Select TUNING.
4. Select READ.
5. ... follow the on-screen prompts.

Uploading Tune Files to you OFT

Download the appropriate stage program that matches your hardware configuration AND calibration code. Follow the instructions below to load the program onto your Openflash Tablet.

NOTE: To upload files to your OFT, download and install OpenFlash Manager.

NOTE: You MUST a use a native Windows-based PC for the following procedures = virtual machines, or other simulated Windows device/software is not compatible at this time.

1. Ensure that your PC has an active internet connection.
2. Open the OFM application.
3. Connect your Openflash Tablet to your PC using the supplied USB-A to Mini USB cable.
   • On the initial launch, OFM may apply necessary tablet updates. This can take some minutes.
4. After all updates are applied, navigate to UPLOAD DATA. 
5. Identify any empty MOD FILE slots, and select the folder icon to the right of the memory slot.
6. Choose the tune file you’ve downloaded to load a program into the slot.
   • If there are no empty memory slots, you will need to delete any existing program(s) by selecting on the red X button to the right of the slot.
   • You can select continue this process to fill any empty/remaining empty slots with new tune programs.
7. Once all your desired files are loaded, press START.
8. After the programs have been written to the memory slots, you can disconnect the tablet from your PC.
   • Loading the programs to the MOD FILE slots can take some minutes.

Programming Your Vehicle ECU

1. Ensure that your battery is fully charged and healthy
   •  As a precaution you should choose to connect your vehicle to a battery charger/booster.
2. Connect your tablet to your vehicle, and let it boot up.
3. Turn the key/ignition to the ON position without starting your engine.
   • For cars with conventional keys, that is TWO key clicks from OFF.
   • For cars with push-button start that is TWO button presses WITHOUT depressing the brake or clutch pedal.
   • Your fuel gauge should be indicating a fuel level when your in the ON position.
4. Select the TUNING menu option on your tablet.
5. Select the WRITE option.
6. Choose the tune file you’d like to flash, and then follow the on-screen prompts.

WARNING: If you plan to MODIFY the stage tune files you're downloading, USE ONLY the v4 definitions that are provided in this .zip file!! DO NOT use old definition files from other stage versions (v1, v2, v3, etc.). Delete/remove any (other) definition files that match your ROM ID from ROMRAIDER!

To access these free tune files, please click here.

• Add this item to your cart (QTY 1)
• Complete your checkout!

Your download links will be available on your DOWNLOADS page when you login and go to your MY ACCOUNT page.

Disclaimer:  All downloadable .xml, .xdf, and tune files are created as the result of the extremely complex and time consuming process of reverse-engineering the factory ECU. Because of this complexity, it is necessary to make certain assumptions and, therefore, it is impossible to always deal in absolutes in regards to representations made by these files. In addition, due to this complexity and the numerous variations among different ECUs, it is also impossible to guarantee that the files will not contain errors or other bugs. What all this means is that there is the potential for bugs, errors and misrepresentations which can result in damage to your motor, your ECU as well the possibility of causing your vehicle to behave unexpectedly on the road, increasing the risk of death, loss, or injury. Modifications to your vehicle's ECU may also be in violation of local, state and federal laws. By using these definition files, either directly or indirectly, you agree to assume 100% of all risk and Openflash Performance Inc., its agents, creators and/or contributors shall not be held responsible for any damages or injuries you receive. This product is for advanced users only. There are no safeguards in place when tuning with TunerPro, ROMRaider, and on occasion your Openflash Tablet or Openflash Manager. As such, the potential for serious damage, injury, or loss still exists, even if you do not experience any bugs or errors.

These definition and tune files are created for free without any sort of guarantee. The developers and Openflash Performance Inc. cannot be held liable for any damage or injury incurred as a result of the files you willingly download. By seeking out and downloading these files you assume all risk, responsibility, and liability for the application and their use.